GE IS200PMCIH1AAA6BA00 Mark VIe PC Interface Board

GE IS200PMCIH1AAA6BA00 is the mounting and interconnection base for a PAC8000 remote I/O assembly, holding up to eight I/O modules and tying them to the Bus Interface Module or controller, the power supplies and the snap-on field terminals. It forms the physical and electrical backbone of the station, carries the address, data and power lines of the internal Railbus, and mounts on a flat panel or on T-section or G-section DIN rail.

Product Datasheet

• Brand: GE
• Model:IS200PMCIH1AAA6BA00
• Module Capacity: 8 I/O modules
• Function: Carries and interconnects the BIM or controller, power supplies, I/O modules and field terminals; distributes Railbus address, data and power lines
• Mounting: Flat panel, or T-section / G-section DIN rail (7.5 x 35 mm or 15 x 35 mm to EN 50022, G-section to EN 50035)
• Field Terminals: One snap-on field terminal per I/O module, ordered separately, with a mechanical keying system
• System Platform: PAC8000 Remote I/O (PROFINET, Modbus/TCP)
• System Environmental Rating: IP20, -40 to +70 °C, 30 g shock, 5 g vibration, ISA Level G3 corrosion resistance with conformal coat
• System Approvals: UL, UL HAZLOC Class I Division 1, CE, ATEX Zone 1, Lloyd's Register (marine)
• Related Carriers: 8709-CA-08 (8 module with earth bar), 8727-CA-08 (8 module intrinsically safe), 8710-CA-04 (4 module)

Fault Troubleshooting and Common Questions

1. I/O modules are not recognised by the controller. Check that the modules are fully seated on the carrier, that the BIM or controller is correctly installed and configured, and that the station address and bus settings match the configuration. Verify the Railbus connections and any carrier extension cables.
2. A channel reads or drives incorrectly at the field terminal. Check the field terminal seating and keying on the carrier, the wiring at the terminal, and the module's channel configuration. Verify the field supply and the module's diagnostic indications.
3. The station is unstable or modules drop offline intermittently. Check the carrier mounting and earth connections, the DIN rail bonding, and the power supply capacity and distribution across the carrier. Inspect for loose terminal blocks or damaged Railbus contacts.

Safety Precautions

• Isolate power and follow lockout/tagout procedures before mounting the carrier or inserting modules.
• Use electrostatic discharge protection when handling modules and carriers.
• Verify earth bonding, keying and terminal assignments before energizing the station.
• Do not connect field wiring until the module ratings and area classification have been confirmed.
• Use qualified personnel for installation and maintenance in hazardous area installations.

🖋Main Products

We specialize in supplying original imported spare parts for DCS, PLC, robotics, and large servo systems from leading global brands, including:

• FOXBORO | EMERSON | TRICONEX | XYCOM | BENTLY
• ROCKWELL | ABB | GE | Aen-Brady | YOKOGAWA
• HONEYWELL | RELIANCE | SCHNEIDER | MODICON
• Westinghouse | WOODWARD | Motorola | Rexroth | SEW