ABB SD802F AC 800F Redundant 24 VDC Power Supply
The ABB SD802F is the 24 V DC power supply module of the AC 800F controller. It takes two independent 24 V DC inputs, switches between them automatically, and generates the 3.3 V DC and 5.0 V DC rails that feed the controller's CPU board and its E1/E2 and F1–F4 slots. The module occupies the leftmost P slot of the AC 800F and carries the controller's basic operating buttons and status indicator on its front. Because the two inputs are both live and self-switching, a loss on one feed leaves the controller running on the other.
Key Specifications
-
Manufacturer: ABB
-
Model: SD802F
-
Ordering Code: 3BDH000012R1
-
Product Type: Power supply module for the AC 800F controller
-
Input: Dual 24 V DC, range 19.2–32.5 V DC
-
Input Ripple: 14 % peak-to-peak permitted
-
Input Source: Can be fed from a three-phase bridge rectifier
-
Input Redundancy: Two inputs, automatic switchover
-
Reverse Polarity Protection: Provided
-
Output Voltage: 3.3 V DC ± 3 %, 5.0 V DC ± 3 %
-
Output Current: 0.5–5 A on 3.3 V, 0.5–5 A on 5.0 V
-
Total Output Power: 26.5 W maximum
-
Current Limit: Approximately 6 A
-
Rated Input Power: 31 W
-
Efficiency: 86 %
-
Heat Dissipation at Normal Load: 5 W
-
Inrush Current: Up to 15 times normal current peak
-
Hold-up on Power Failure: >20 ms
-
Isolation: No galvanic isolation between input and output
-
Output Safety: SELV
-
Test Voltage: 3.3 kV DC
-
Diagnostic Port: 9-pin D-sub, male, with +5 V / 100 mA output and TxD/RxD
-
Backplane Connector: 96-pin module/CPU board connector
-
Slot: Leftmost P slot of the AC 800F
-
Front Indicator: Green "power" LED for internal supply voltage normal
-
Front Controls: Run/Stop, Toggle Prim/Sec (redundancy switchover), Reset
Key Features
-
Two 24 V DC Inputs with Automatic Switchover: Both feeds stay connected and the module moves to the healthy one without operator action, which is what makes the redundant DC arrangement work in a control cabinet.
-
Wide DC Input Window: Accepts 19.2–32.5 V DC with 14 % ripple, so it runs from a battery plant or a rectified three-phase supply without a separate regulator stage.
-
3.3 V and 5 V Rails at 26.5 W: Supplies both internal rails the AC 800F needs, 5 A on each, covering the CPU board and the module slots.
-
Hold-up Beyond 20 ms: Output is maintained for more than 20 ms after a supply failure, which rides through short dips on the DC plant.
-
Protection Chain: Reverse polarity protection on the inputs, over-current detection and short-circuit protection with a current limit of about 6 A, plus input and output voltage monitoring that reports a power failure signal.
-
Diagnostic Port: A 9-pin D-sub with serial TxD/RxD and a +5 V / 100 mA auxiliary output gives access to the module's diagnostic data.
-
Controller Controls on the Front: The module carries the Run/Stop switch, the Prim/Sec redundancy toggle and the Reset button, so the controller is operated from the power supply face.
-
SELV Outputs: The output side is SELV, and the module is designed to sit in the P slot at the left of the rack.
Typical Applications
-
AC 800F controller racks in Freelance system cabinets
-
Redundant 24 V DC station supplies fed from battery plants or rectifier banks
-
Process and power plant control rooms running Freelance automation
-
Replacement of a failed supply module in an existing AC 800F rack
-
Spare-part stocking for AC 800F installations
🖋Main Products
We specialize in supplying original imported spare parts for DCS, PLC, robotics, and large servo systems from leading global brands, including:
-
FOXBORO | EMERSON | TRICONEX | XYCOM | BENTLY
-
ROCKWELL | ABB | GE | Aen-Brady | YOKOGAWA
-
HONEYWELL | RELIANCE | SCHNEIDER | MODICON
-
Westinghouse | WOODWARD | Motorola | Rexroth | SEW
✨Tiana Lai(Sales Director)
?Email: ydf8801@163.com
?Tel: + 8613666014880(WhatsApp/WeChat)
?️Ship to you via DHL/TNT/UPS/EMS/Fedex
?Product Condition: One-year warranty
Xingchuang Ronghe (Fuzhou) Electrical Equipment Co., Ltd. is dedicated to delivering high-quality electrical equipment solutions, backed by professional product supply capabilities and a comprehensive technical service system. We stay customer-centric, continuously optimizing product performance and service experience. If you have any needs, you are welcome to contact us at any time for consultation and discussion. We look forward to partnering with you to create value together!🎇